Friday, August 9, 2013

JOYOS Custom Rom based cm7.2 for galaxy y. JOYOS is cm7 based rom which look like latest IOS. This Rom is developed by hacker0377 of XDA. This rom is stable except USB tether but USB tether can be fix by flashing savie USB tether patch. So let install this Rom on our galaxy y.
JOYOS Custom Rom based cm7.2 for galaxy y  
  JOYOS Custom Rom based cm7.2 for galaxy y

Features
  • JOYOS Custom Rom based on latest precy cm7.2
  • All theme like IOS
  • IOS7 alike ControlCentre
  • Modified Popup menu,text fields,volume up and down and others to look like IOS
  • All apps resized to fix with galaxy y screen
  • and much more
  • Flash rom and explore yourself
Warning:
Use at your own Risk! This custom Rom is only meant for Galaxy y don't use on other device.We will not be held responsible for any damage to your phone.


Requirement and Download:
A Rooted Samsung galaxy y.
CWM: CWM
Kernel: percy_g2.tar
Rom file : (not mirrored)HM-IOSV1.1-totoro-cm7based20130807.zip
Size: 105.99 MB

Installation Instruction:

  • Before proceeding backup your system and charge battery full.
  • Download the cwm, Kernel and ROM file and place them in the root directory of your phones sdcard.
  • Then install the kernel "percy_g2.tar" provided in Requirement section of this post.( How to flash kernel )
  • Reboot to recovery mode using combination of 3 button (Home Key+Volume Up Key + Power Key) together.
  • In recovery mode use volume up and down to move up and down, home as selection button and power as back.
  • Now select "apply update from sdcard" and select the CWM file "CWM.ZIP" 
  • Wipe Data/Factory Reset,
  • Wipe Cache Partition.
  • After that Select install zip from sd and then "choose zip from sdcard" and select Rom File "HM-IOSV1.1-totoro-cm7based20130807.zip" and then ok
  • Flashing should begin let the process complete successfully and reboot.
  • Remember first boot may take longer then normal boot some times say 10 minutes in case stuck on boot logo remove battery after turning off enter recovery mode and do Wipe Data and Wipe Cache Partition and reboot again in normal mode.
Congratulation! you have learned how to successfully install JOYOS Custom Rom based cm7.2 for galaxy y In case you notice bug post on thread page so developer may fix on next update.
Read More

Wednesday, August 7, 2013

Vivo wood Themes for galaxy y with Full Wood Experience On Our Little Y. This theme look nice and beautiful. This theme is shared on XDA by san122 here we have few screenshot:
Vivo wood Themes for galaxy y

Features:
  • Statusbar
  • Dialer
  • Lidroid-res
  • Framework-res
  • vivo bootanimation with sound
  • Every app has been themed in black Wood Style
  • Cool transition animation and animation speed.
  • + more
Download:
Theme: vivo woodupdatefinal.zip

Source xda
Read More

Tuesday, August 6, 2013

Jelly Bean Theme V4.0 for galaxy y. As we know that Jelly Bean is the latest version of android OS but can't be installed on galaxy y but we can still achieve feel and look of Jelly Bean on galaxy y gt-s5360. So you can install a theme called Jelly Bean Theme V4.0 created and shared by marinalin85 and achieve feel and look of Jelly Bean on galaxy y. In this theme 80% of apps from CoD Rom, so basically this theme is for CoD Rom, but it should work in other Custom Roms. So before proceeding here are few screen shot have a look.

Jelly Bean Theme V4.0 for galaxy y running on CoD Rom

Features:
Every app has been themed in JB style, with 2 parent style as Theme.Dark and Theme.Light.
Icons in both dark and light style.
Volume adjust JB layouts
Cool JB transition animation and animation speed.
Apps such Contacts, Mms, Dialer has been moved on to another level of beauty.
Contacts with 3 tabs used most, high quality contact photo on contact viewer, top action bar and beautifull outfit
Settings with 4 different theme as JB, TouchWiz 5.0, LG UI 3.0 and Parandroid UI, with nice JB on/off switches.
Apps now are using top action bar as Holo style for delete, cancel, save, rename actions.
Notification Bar fully inspired by JB 4.2 QuickSettings Notification bar.
Calendar with better and nicer look.
MyFiles in white style, with back button in title bar.
In call screen with ICS buttons layout and high quality contact photo.
Dialer with 3 tabs used most, high quality call log, top action bar and ics layout buttons.
Original textfield, dropdown, popup-dialog, listselector background for both styles.
Title bars with launcher icon.
No 3rd-party apps, everything is gingerbread Galaxy Y apps

Download:
Theme:(not mirrored): Download Jelly Bean Theme V4.0

enjoy...
source: XDA
Read More

Monday, August 5, 2013

MiniROM TouchwizUX Inspired v3 Rom for galaxy y gt-s5360. Hi friends today here we are providing steps how to install MiniROM TouchwizUX Inspired v3 with Samsung Touchwiz Nature UX look into our Galaxy Young. This rom is developed and shared by ryanfebriyadi member of xda so if you like his work don't forget to thanks him. So here are few screenshot (by dev) of MiniROM v3 running on galaxy y.

Screenshots:
MiniROM TouchwizUX Inspired v3 for galaxy y   
MiniROM TouchwizUX Inspired v3 for galaxy y   
Warning:
Use at your own risk! we will not be held responsible for any damage to your device.

Requirements:
A Samsung Galaxy Y model GT-S5360 running on stock rom.
ROOT ACCESS (just root to be sure)
CWM

Download:
Rom file: MiniROM TouchWizUX Inspired v3.zip
Rom size:98.34 MB
Update 1: Update miniROM TouchWizUX Inspired 1.zip
Cwm: CWM.zip

Installation steps:
  • First be on stock ROM and then install DXLF Deodexed Stock Rom (get it here)
  • Take backup of your system and charge battery full. 
  • Download CWM and Rom file " MiniROM TouchWizUX Inspired v3.zip" from above and place it in the root directory of your SD Card and turn off your phone 
  • Reboot your phone in recovery mode by pressing volume up + Home + power button together when you enter recovery mode touchscreen will not work so take help of key vol up and down to move up and down home for making selection and power as back. Now from stock recovery select "update from SD card" and select "cwm.zip"
  • As now in CWM mode do wipe data and cache after that Mount system. 
  • Now go to “Install zip from SD" and from there “Choose zip from SDcard”and navigate to the root directory where you have saved MiniROM TouchWizUX Inspired v3.zip and choose MiniROM TouchWizUX Inspired v3.zip file.
  • Now flash the rom and let the process complete successfully and reboot your device.
Install update 1:
  • Boot in CWM mode again.
  • Now go to “Install zip from SD" and from there “Choose zip from SDcard”and navigate to the root directory where you have saved Update miniROM TouchWizUX Inspired 1.zip and choose Update miniROM TouchWizUX Inspired 1.zip file and flash it.
Change language:
As this Rom is by default in Indonesian you can change to English or one you prefer if available by pressing option button (left key) on home screen then select Pengaturan (setting) then find Bahasa dan input (Locale and text ) click on Pilih Bahasa (select language) and choose language of your choice.

Congratulation! you have successfully learned how to install MiniROM TouchwizUX Inspired v3 custom Rom for galaxy y. If you notice any bug post on the thread page so dev may fix when he releases next update.
To receive latest update from us like our  facebook page Techweem

Read More
UFSx + HWK Setup v02.03.00.00 is Official Released. This latest update of UFSx and HWK support few new devices see the list provided below:
Download latest UFSx + HWK Setup v02.03.00.00


DCTxBB5 v2.3.0.0
  • BB5 RAPU Based Products USB Flashing / UI support added: RM-754 (801T)
  • DCT4 INFINEON Based Products USB Flashing / UI support added: RM-694,RM-761,RM-799,RM-800 (X2-02,200,201,201.1)

LG_GSM v2.3.0.0

  • Infineon Egold Boot Fixed (was broken in v 2.2.0.3)
  • Infineon E500,KM553,KM555,KM555e,KM555g,KM555R added (FL,CUL)
  • Infineon GT370,GU230GO,S367 added (FL,CUL,DUL,IM)
  • Infineon T370,T375,T385,T385b,T395,T500GO,T505GO,T565,
  • T565b,T575 added (FL,DUL)
  • MTK: A290 added (FL,3xIM)
  • MTK: USB Support for UI Functions (Select COM on Phone)
  • WiFi MAC Address Write Added for Infineon and MTK platforms.
SAMs v2.2.0.3
  • SWIFT
  • T456-FIDO,T456-ROGERS added (UNL,SECT,IM,FL)
  • SWIFT-AEROFONE
  • [Patch MSL] fixed for DUOS Products.
  • E1086W,E1153i,E1182-CHN,E1195L,E1200,E1200M,E1200M-CHN,
  • E1200T,E1202,E1205,E1205L,E1205M-CHN,E1205T,E1207,E1207T-IND,
  • E1207-MEA,E1220T,E1230T,E1232B,E1232D added (PUNL,PIM,FL)
  • C3520,C3780,C3782,E2250,E2252 added (UNL,SECT,IM,FL)
  • E2220,E2222L (UNL,SECT,IM)
  • SWIFT-3G
  • C3630,C5190,C5530,E3217B,E3217L,S5270K,S5270L,S568 0 
  • added (UNL,SECT,FL)
  • C5010,E3210,E3213,S5610 Direct Unlock Fixed.
  • IMEI Repair Added for Almost All Models:
  • C3630,E2310,E2313,S3710,S5270,S5610,..
  • INFINEON
  • C3310,C3310R,C3312,C3312R,C3313K,C3330,C3332,C3350 ,C3350M,
  • E2230L,E2350B,E2600,E2600M,S3800,S3802,S3802W,S522 0,S5220R,
  • S5222,S5222R,S5229,S5292,S5296 added (CUNL,PUNL,PIM,FL,UFL)
  • E1151 Missing boot fixed.
  • E1151 IMEI Rebuild and Direct Unlock added (AT Mode)
  • Note: Need make Boot Mode Info before use of AT Mode.
  • QUALCOMM
  • M210S,T356 Added.
  • BROADCOM
  • S5380B,S5380D,S5380F,S5380G,S5780D,S7250,S7250D added (UFL)
Download:

Official: sarunasoftware

Or

UFSx Support Suite : UFSx + HWK Setup v02.03.00.00

Installation:
  • Uninstall ALL previous versions, you MUST uninstallHWK Suite BEFORE trying to uninstall HWK Support Suite Setup.
  • Install UFSx Support Suite Setup
  • Connect your UFSx+HWK before running the UFSx Control Panel
  • Run UFSx Control Panel
  • Select the "Hardware" Tab
  • If you only have one UFSx connected it will be selected, if more than one, select the check box next to the required UFSx. You can click "Scan Boxes" to refresh the list if you have connected further boxes since opening the Control Panel
  • Click "Check Box"
  • Click "Update Box"
  • Click "Check Box"
  • Select the "Software" Tab
  • Amend "Application Install Path" and/or Nokia InstallPath, if required.
  • Click "Check Server"
  • Click "Install"
Enjoy..............
Read More

Sunday, August 4, 2013

Google Hindi Input is a Hindi keyboard for android phone here we have used this application on Samsung galaxy y gt-s5360 running on gingerbread and it work perfectly. Google Hindi Input is an Indic IME which allows you to type messages, update on social networks or compose emails in Hindi on your Android phone. If you can read नमस्ते correctly on your phone, then you may install and use Google Hindi Input, otherwise your phone may not support Devanagari script. As Before Android 4.0, Google did not provide official Devanagari font support. Please make sure that your manufacturer provides additional Devanagari font in your phone.
Google Hindi Input for Samsung galaxy y android phone
Screenshots:
 Google Hindi Input for Samsung galaxy y android phone 
 Google Hindi Input for Samsung galaxy y android phone 
Download:
Hindi keyboard : Google Hindi Input v1.0.1.apk(direct)

OR

Hindi keyboard from: Google play

How to enable hindi input method/IME on my Android phone and set it as the default keyboard?

On Android 4.x and newer versions:
  • Install the apk
  • Open Settings -> Language & Input, under “KEYBOARD & INPUT METHODS” section, check Google Hindi Input, then click Default and select “Hindi transliteration” in the “Choose input method” dialog.
  • When typing in an input box, you can also change the default input method by selecting “Choose input method” in the Notification area.
On Android 2.x (using galaxy y):
  • Install the apk
  • Open Settings > locale and text > scroll down and in "Text setting", check "Google Hindi input". Now Again in "Text setting" click on select input method and a popup window appear and check "Google Hindi input" or 
  • When typing in an input box, long press in the box and select “Input method” in the popup menu, then select “Google Hindi Input”.
 हिंदी कुंजीपटल से टाइप कर्र एंड्राइड फोने पर।
Read More

Saturday, August 3, 2013

Install Android 4.3 jelly bean on x-86 based PC or laptop. As we know that recently Google's new mobile operating system Android 4.3 jelly bean has been lunched so now we can test this flavor on our x-86 based computer or laptop .This is ported by Chih-Wei Huang for X-86 based machine. What is new in latest android jelly bean It’s fast. Even better, the latest version of Android-x86 comes with access to the Android Market, which means you can try out thousand of Android apps from Android Market which is now known as Google Play.

As in our previous article we have already posted how to make boot-able USB of Android x-86 and install Android on x-86 based PC or laptops But if you are new here then you can visit our previous article where we have already posted tutorial on how to make bootable USB of Android 2.2 x-86 ISO and install it on PC or laptop as the procedure will be same.
Install Android 4.3 jelly bean on x-86 based computer or laptop
Download:
First of you will have download Android 4.3 jelly bean: Android-x86-4.3.iso

Installation:

  • Now if you have downloaded the .ISO 
  • Now lets move to the next step that is making boot-able CD or USB:
  • As now you have downloaded the Android 4.3  ISO for your PC or laptop now you can either burn boot-able CD or make a boot-able USB. I hope all of as know how to burn boot-able image to CD or DVD.
  • So if you want to install from usb you will have to make your usb bootable. For tutorial click here
  • Now lets move to the next step Installation:
  • As i have already posted article before how to install android on x-86 based PC or laptop if escaped click here


enjoy...............
Read More

Thursday, August 1, 2013

As we know Google is currently rolling out the update to Android 4.3 for the Nexus devices, along with that Google has also released several updates for some Google apps such as Google Play Movies, Google Play Music and Google Play Store. The latest version of the Google Play Store app for Android devices is now 4.2.9. Of course, the update will be rolled out to all supported Android smartphones and tablets but you can also install this new version of the Google Play Store v4.2.9. manually.

Screenshot galaxy y:

Latest Google Play Store 4.2.9 – APK Download 

 
Download:

Installation:
Download the APK file of the  Latest Play Store  v 4.2.9 and place on sd card.
Enable the installation of “installation of non-market application” in the application settings of your device.
Now install the app.

Read More
Hi dear users of galaxy y gt-s5360 toay a new custom rom for device galaxy y is shared on xda and here we are providing you step by step installation guide of this rom. This rom looks smooth and beautiful. The rom is shared on xda by yosh91 so lets take look on features and screenshot of this rom.
Screenshots:

Jelly win v1 custom Rom for galaxy y gt-s5360

Features:
  • Sound script
  • No kernel
  • Deodexed
  • Jelly Bean sensations
  • More saver battery
  • New setting mod
  • Walkman player
  • New ui
  • Zipalgin
  • Green color font
  • More color full
Warning:
Use at your own Risk! we will no be held responsible for any damage to your device.

Requirements:
  • A Samsung Galaxy Y model GT-S5360 running on stock rom.
  • ROOT ACCESS (just root to be sure)
  • CWM
Download Details:
Rom Name:(not mirrored) jelly win v1.zip
Rom Size: 118.02 MB
CWM: CWM_bla_bla.zip

Installation steps:
  • First be on stock ROM and then install DXLF Deodexed Stock Rom (get it here)
  • Take backup of your system and charge battery full. 
  • Download CWM and Rom file " jelly win v1.zip" from above and place it in the root directory of your SD Card and turn off your phone 
  • Reboot your phone in recovery mode by pressing volume up + Home + power button together when you enter recovery mode touchscreen will not work so take help of key vol up and down to move up and down home for making selection and power as back. Now from stock recovery select "update from SD card" and select "cwm_bla_bla.zip"
  • As now in CWM mode do wipe data and cache after that Mount system. 
  • Now go to “Install zip from SD" and from there “Choose zip from SDcard”and navigate to the root directory where you have saved jelly win v1.zip and choose jelly win v1.zip.
  • Let the installation complete and Reboot.

Congratulation! you have successfully learned how to install jelly win v1.zip custom Rom for galaxy y. If you notice any bug post on the thread page so dev may fix when he releases next update.

To receive latest update from us like our  facebook page Techweem
Read More
Related Posts Plugin for WordPress, Blogger...
Google Google+